ASTM hot rolled nickel alloy inconel 600 601 625 718 X750 800 strip
Product Information
Inconel is a family of austenitic nickel-chromium-based super alloys.
Inconel alloys are oxidation-corrosion-resistance materials well suited for service in extreme environments subjected to pressure and heat.When heated,Inconel forms a thick,stable,passivating oxide layer protecting the surface from further attack.Inconel retains strength over a wide temperature range,attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies,Inconel's high temperature strength is developed by solid solution strengthening or precipitation hardening,depending on the alloy.
Size dimension range:
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Inconel series: 600,601,617,625,690,718,X-750,825
-
Chemical Properties of Inconel X750
Element |
Ni +Co |
Cr |
Nb |
Ti |
C |
Mn |
Si |
Cu |
Al |
S |
Iron |
Chemical Composition (%) |
70% Min
|
14%-
17%
|
0.7%-
1.2%
|
2.25%-
2.75%
|
0.08% max |
1% max |
0.5% max |
0.30% max |
0.4%-1.0% |
0.01% max |
5%-9% |
Some typical applications are:
- Gas turbines
- Jet engine parts
- Nuclear power plant applications
- Heat-treating fixtures
- Forming tools and extrusion dies
- Pressure vessels
- Aircraft structures